Home
Products
Specifications
Contact Us
 

Specifications


Cap flashings in walls where flat roofs abut shall be two piece type as manufactured by Keystone Flashing Co., Philadelphia, PA. Receiver shall be formed of (gauge/material) with a special vertical locking slot that requires no malleting or bending to hold the insert member in place. Combination receivers and thru-wall flashing shall have 3/16" high undercut sawtooth ribs at 3" intervals to provide a mechanical bond in the mortar bed in all three directions. The insert members shall be formed of (gauge/materials) and designed to snap lock into the receiver portion and provide a spring like hug against the base flashing. Thru-wall receivers shall be set with a thin bed of mortar below and above. Install counter flashing insert members with end
joints lapped 3".


Cap flashings in walls where flat roofs abut shall be two piece type as manufactured by Keystone Flashing Co., Philadelphia, PA. Receiver shall be formed of (gauge/material) with a special vertical locking slot that requires no malleting or bending to hold the insert member in place. Combination receivers and thru-wall flashing shall have 3/16" high undercut sawtooth ribs at 3" intervals to provide a mechanical bond in the mortar bed in all three directions. The insert members shall be formed of (gauge/materials) and designed to snap lock into the receiver portion and provide a spring like hug against the base flashing. Thru-wall receivers shall be set with a thin bed of mortar below and above. Install counter flashing insert members with end
joints lapped 3".

We are currently creating content for this section. In order to be able to keep up with our high standards of service, we need a little more time. Please stop by again. Thank you for your interest!

 
Top